Jointed robot 3D for print
4169 Views 9 Likes 5 Downloads Download
Here you can see how it moves: https://www.youtube.com/watch?v=bH3-T-4muZQ&feature=youtu.be
Thickness: 1.2
Fill density: 20%
Its measurement is 20cm
Note: Be careful with the joint at the base of the neck and fingers, they often remain stuck in printing, and is difficult to get moving the joint
Designer
SONIA VERDU3d model description
I like to create jointed figures. You can see my creations here: http://www.soniaverdu.es/p/bjd-art-doll.html I want to share this posable robot figur...ine with you. It features ball joints and some hinge-like joints. An elastic cord is used to secure the limbs and allow for positioning - no screws required! I hope you enjoy."Here you can see how it moves: https://www.youtube.com/watch?v=bH3-T-4muZQ&feature=youtu.be
3d model print parameters
I recommend printing oh highest quality for good fitment. No need material support should be needed. Video on assembling the robot figurine with elast...ic cord: https://www.youtube.com/watch?v=-oG39NoSJGM&feature=youtu.be"Thickness: 1.2
Fill density: 20%
Its measurement is 20cm
Note: Be careful with the joint at the base of the neck and fingers, they often remain stuck in printing, and is difficult to get moving the joint
