Jung cd500 spacer for homematic switches 3D for print
1093 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
The HomeMatic HM-PB-2-WM55-2 wall-mounte...d switch is difficult to integrate with existing switch designs. I wanted mine to match my other switches and power outlets which are from the Jung CD500 series.
To achieve this, I designed this spacer, which is glued or screwed to the wall and holds the base plate of the HomeMatic HM-PB-2-WM55-2 and the Jung CD581 frame.
The rocker, I used CD590 and CD590P rockers, is then cleaned on the backside from all holding material and glued to the top of the HM-PB-2-WM55-2 with Tesa Powerstrips.
- Jung CD590 1-gang rocker
- Jung CD581 frame 1-gang
- Screws or Tesa Powerstrips to mount...
Designer
Reiner Bühl3d model description
A spacer to integrate the HomeMatic HM-PB-2-WM55-2 wall-mounted switch with Jung CD500 series switch covers.The HomeMatic HM-PB-2-WM55-2 wall-mounte...d switch is difficult to integrate with existing switch designs. I wanted mine to match my other switches and power outlets which are from the Jung CD500 series.
To achieve this, I designed this spacer, which is glued or screwed to the wall and holds the base plate of the HomeMatic HM-PB-2-WM55-2 and the Jung CD581 frame.
The rocker, I used CD590 and CD590P rockers, is then cleaned on the backside from all holding material and glued to the top of the HM-PB-2-WM55-2 with Tesa Powerstrips.
3d model print parameters
- ABS in the color of your switch covers- Jung CD590 1-gang rocker
- Jung CD581 frame 1-gang
- Screws or Tesa Powerstrips to mount...