Kitchenaid mvsa cone slicer attachment 3D for print
1509 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
When you lost or broke the grey stamp for your KitchenAid (C) cone slicer this will... allow you to have a replacement. I experimented with two different print settings - both successful:
- 0,8mm top and bottom layer and wall width and 20% infill
- 3mm top and bottom layer and wall width and 0% infill
I wondered why the last design even worked, because the top is a large bridge spanning 6x6 cm and it filled and is solid!
Both are sturdy and stable.
-PLA...
Designer
Arnold3d model description
We lost the stamp to our KitchenAid slicer - so I made a new one.When you lost or broke the grey stamp for your KitchenAid (C) cone slicer this will... allow you to have a replacement. I experimented with two different print settings - both successful:
- 0,8mm top and bottom layer and wall width and 20% infill
- 3mm top and bottom layer and wall width and 0% infill
I wondered why the last design even worked, because the top is a large bridge spanning 6x6 cm and it filled and is solid!
Both are sturdy and stable.
3d model print parameters
-ABS-PLA...
