Kossel plus magnetic carriage 3D for print
1075 Views 0 Likes 0 Downloads Download
This is a simple carriage which works with magnetic ball joints and Delrin or POM wheels. You can get the wh...eels inexpensively from DeltaPrintr.com
This works nicely with my magnetic effector: https://www.youmagine.com/designs/kossel-plus-magnetic-effector
And with my magnetic ball joint rod ends:
https://www.youmagine.com/designs/magnetic-ball-joint-rod-ends
It is based on my more universal Kossel carriage:
https://www.youmagine.com/designs/improved-kossel-carriage-for-deltaprintr-or-graber-wheels-and-1515...
Contact me at haydn.huntley@gmail.com if you need an inexpensive source for the ball studs and/or magnets.
2014-08-17: Slightly improved the design. Added a lip to better trigger the endstop switches. Made the ball stud nut traps shallower. Changed the angle for the ball studs from 30° to 45° to optimize the amount of freedom they offer.
Graber sells them for $7.45 each, w...hich works out to $67 for a set of 9: http://3d.grabercars.com/?product=dual-623-v-roller
You will also need the usual M3 bolts, washers and nuts:
- 3 M3x25 bolts for the axles.
- 3 M3 washers as spacers.
- 3 M3 nyloc nuts to hold the wheels on.
- 1 M3x35 bolt for pretensioning.
- 1 M3 nyloc nut for pretensioning.
- 2 ball studs.
- 2 M3 nylock nuts to hold the ball studs on.
Contact me if you need an inexpensive source for the ball studs. I had a bunch custom fabricated. 1000 were essentially the same price as 50, so I have lots left over to share with the Delta/Maker community! I'm offering them for $1 each, plus shipping. haydn.huntley@gmail.com
Designer
Haydn Huntley3d model description
Magnetic carriage for a Kossel printer.This is a simple carriage which works with magnetic ball joints and Delrin or POM wheels. You can get the wh...eels inexpensively from DeltaPrintr.com
This works nicely with my magnetic effector: https://www.youmagine.com/designs/kossel-plus-magnetic-effector
And with my magnetic ball joint rod ends:
https://www.youmagine.com/designs/magnetic-ball-joint-rod-ends
It is based on my more universal Kossel carriage:
https://www.youmagine.com/designs/improved-kossel-carriage-for-deltaprintr-or-graber-wheels-and-1515...
Contact me at haydn.huntley@gmail.com if you need an inexpensive source for the ball studs and/or magnets.
2014-08-17: Slightly improved the design. Added a lip to better trigger the endstop switches. Made the ball stud nut traps shallower. Changed the angle for the ball studs from 30° to 45° to optimize the amount of freedom they offer.
3d model print parameters
Deltaprintr sells 9 carriage wheels with bearings for $20: http://deltaprintr.com/shop/hardware/carriage-wheel/Graber sells them for $7.45 each, w...hich works out to $67 for a set of 9: http://3d.grabercars.com/?product=dual-623-v-roller
You will also need the usual M3 bolts, washers and nuts:
- 3 M3x25 bolts for the axles.
- 3 M3 washers as spacers.
- 3 M3 nyloc nuts to hold the wheels on.
- 1 M3x35 bolt for pretensioning.
- 1 M3 nyloc nut for pretensioning.
- 2 ball studs.
- 2 M3 nylock nuts to hold the ball studs on.
Contact me if you need an inexpensive source for the ball studs. I had a bunch custom fabricated. 1000 were essentially the same price as 50, so I have lots left over to share with the Delta/Maker community! I'm offering them for $1 each, plus shipping. haydn.huntley@gmail.com
