Coffee container in drum barrel design 3D for print
1117 Views 0 Likes 0 Downloads Download
Print the container and lid.
The white EVERGOOD logo was made in while filament, 0....6mm thick and superglued on
This is a new model of http://www.thingiverse.com/thing:35673
Higher STL resolution gives better pressfit for lid.
I would recommend 0.2 layers, as I got some minor stringing in the ...rounded edges on the outside.
Sand the joints until pressfit, with 3 shells its pretty airtight so coffee should be fresh atleast for a few days.
Designer
catohagen3d model description
A coffee container holds 500grams of coffee (beans or grinded)Print the container and lid.
The white EVERGOOD logo was made in while filament, 0....6mm thick and superglued on
This is a new model of http://www.thingiverse.com/thing:35673
Higher STL resolution gives better pressfit for lid.
3d model print parameters
I printed this in Colorfabb Ngen, I used 0.26 layers and 3 shells and 20% infill.I would recommend 0.2 layers, as I got some minor stringing in the ...rounded edges on the outside.
Sand the joints until pressfit, with 3 shells its pretty airtight so coffee should be fresh atleast for a few days.
