Lattice cube torture test 3D for print
2176 Views 2 Likes 1 Downloads Download the piece here from 3dforprint
I wanted to print a lattice cube too. So I made one myself....
Layer: 0.2 - 0.1 (=TESTED)
Perimeters: 2 - 5 (=4 recommended)
Infill: 20%
Support: 55° or No
Brim: only if ...needed
Designer
R-Obert3d model description
Lattice cube torture testI wanted to print a lattice cube too. So I made one myself....
3d model print parameters
Tipp: You may need to scale it down.Layer: 0.2 - 0.1 (=TESTED)
Perimeters: 2 - 5 (=4 recommended)
Infill: 20%
Support: 55° or No
Brim: only if ...needed
