Led chair 3D for print
3327 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Read the full guide on: https://learn.adafruit.com/glowing-led-chair/overview
Light up the night and re...lax on a comfortable seat you can easy take to your next time out by the fire.
These super bright NeoPixel LEDs let you change colors and animations with the Adafruit Bluefruit Connect LE app. This customizable 3D printed design can easily hold up to 200 lbs of weight.
We used a 6mm brim to insure the bottom doesn't curl up while printing.The seat part take about 30 hours to complete. Z-Hop is used ...to prevent any collisions with the print head and any edges that might curl up.
We used infill angle offsets to increase the strength of the seat.
Infill angle offsets:
45, 60, 90, 120, -120
The stool feet are printed in original Ninjaflex to make them grippy, but you could also use semi-flex or cheetah.
Designer
Noe + Pedro Ruiz3d model description
Light up the night with a glowing chair!Read the full guide on: https://learn.adafruit.com/glowing-led-chair/overview
Light up the night and re...lax on a comfortable seat you can easy take to your next time out by the fire.
These super bright NeoPixel LEDs let you change colors and animations with the Adafruit Bluefruit Connect LE app. This customizable 3D printed design can easily hold up to 200 lbs of weight.
3d model print parameters
PLA, NinjaFlexWe used a 6mm brim to insure the bottom doesn't curl up while printing.The seat part take about 30 hours to complete. Z-Hop is used ...to prevent any collisions with the print head and any edges that might curl up.
We used infill angle offsets to increase the strength of the seat.
Infill angle offsets:
45, 60, 90, 120, -120
The stool feet are printed in original Ninjaflex to make them grippy, but you could also use semi-flex or cheetah.
