Led christmas tree ornament 3D for print
1199 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This christmas tree can be a very simple decoration for your house and you can do it yourself in a few steps. In the tree is a capacitor and an LED that is powered by a wireless apple watch charger. I had the idea of powering something wirelessly by the apple watch charger, so I made it come to life in this christmas decoration. A wire is made into a coil and connected to an LED and capacitor that helps the led shine brighter. The tree itself is a simple design that I "voronized" to look like a real tree. The bottom part is a stand for the tree itself and the charger. You coil the wire in to the little piece that fits inside the tree. I did this Project for the Make Magazine Holiday Ornament Challenge.
There are two versions of the tree one with voroni effect, I used the website to convert my original design.
There shouldn't be a problem but the circuit might harm your charger so try it at your own risk. I didn't have an issue with it anyways.
http://www.voronator.com/
-LED (preferably green)
-47 nF capacitor
-AWG 24 wire (50 cm)
-Soldering iron and solder (optional) ...
Designer
Tuna Tümer3d model description
This christmas tree is a little ornament that has an LED powered by a wireless AppleWatch charger. Its a very simple ornament for your christmas decor...ation.This christmas tree can be a very simple decoration for your house and you can do it yourself in a few steps. In the tree is a capacitor and an LED that is powered by a wireless apple watch charger. I had the idea of powering something wirelessly by the apple watch charger, so I made it come to life in this christmas decoration. A wire is made into a coil and connected to an LED and capacitor that helps the led shine brighter. The tree itself is a simple design that I "voronized" to look like a real tree. The bottom part is a stand for the tree itself and the charger. You coil the wire in to the little piece that fits inside the tree. I did this Project for the Make Magazine Holiday Ornament Challenge.
There are two versions of the tree one with voroni effect, I used the website to convert my original design.
There shouldn't be a problem but the circuit might harm your charger so try it at your own risk. I didn't have an issue with it anyways.
http://www.voronator.com/
3d model print parameters
-Apple Watch Charger-LED (preferably green)
-47 nF capacitor
-AWG 24 wire (50 cm)
-Soldering iron and solder (optional) ...
