Lego head earrings 3D for print
3519 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
The heads are hollow to give them minimum weight. They have a small hole at the top for earring pins, wich are dropped in through a larger hole at the bottom.
Print Settings
Printer:
Creality ender 3 V2
Rafts:
Doesn't Matter
Supports:
Yes
Notes:
Use a high wall count and really super low infill. Try to stay under 10 grams (to save your ear lobes).
Set Support overhang angle to around 50%. You dont want any support inside the Lego head!
Drop/push an earring pin (with and end knob) here.
The pin will come out here and can be attached to a hook.
Sometimes th...e smaller hole (nr. 2) will be too tight for the earring pin. To fix this simply heat a pin with a lighter and push it through the hole at the top to enlarge it a little bit.
The eyes and mouth can the painted by hand.
Designer
David Fjellving3d model description
One happy, one sad, the original Lego faces as earrings. Of course you can print only happy or sad earrings if you want to. Designed from the exact or...iginal Lego measurements, scaled up around 300%.The heads are hollow to give them minimum weight. They have a small hole at the top for earring pins, wich are dropped in through a larger hole at the bottom.
Print Settings
Printer:
Creality ender 3 V2
Rafts:
Doesn't Matter
Supports:
Yes
Notes:
Use a high wall count and really super low infill. Try to stay under 10 grams (to save your ear lobes).
Set Support overhang angle to around 50%. You dont want any support inside the Lego head!
3d model print parameters
Instructions.Drop/push an earring pin (with and end knob) here.
The pin will come out here and can be attached to a hook.
Sometimes th...e smaller hole (nr. 2) will be too tight for the earring pin. To fix this simply heat a pin with a lighter and push it through the hole at the top to enlarge it a little bit.
The eyes and mouth can the painted by hand.
