Ed209 from robocop 3D for print
1498 Views 3 Likes 2 Downloads Download
3D Print this epic ED209 from the movie Robocop. The model is a remix ...of a 3d model by Onur AYTEKIN and was remodelled and resized to be printed on the Ultimaker 2. There were alot of testing and printing of parts to get the look right, especially around Ed's Black Visor. Several iterations were done with different patterns.
This 3D print model is made from 23 parts.
The final build is approximately 210mm wide x 280mm deep x 245mm high
The legs require "fix horrible" Type A and requires supports "everywhere"
The images you see have very little post-production or painting and is taken straight from the printer, minus a little bit of sanding and polishing of the Bronzefill printed parts.
Website: http://www.imaginables.com.au
- Colorfabb Shining Silver
- Colorfabb Bronze Fill
- Ultimaker Black Filament
- Ultimaker Black flexible Filament ...
Designer
Imaginables Australia3d model description
3D Print this epic ED209 from the movie Robocop. You have 5 seconds to comply!3D Print this epic ED209 from the movie Robocop. The model is a remix ...of a 3d model by Onur AYTEKIN and was remodelled and resized to be printed on the Ultimaker 2. There were alot of testing and printing of parts to get the look right, especially around Ed's Black Visor. Several iterations were done with different patterns.
This 3D print model is made from 23 parts.
The final build is approximately 210mm wide x 280mm deep x 245mm high
The legs require "fix horrible" Type A and requires supports "everywhere"
The images you see have very little post-production or painting and is taken straight from the printer, minus a little bit of sanding and polishing of the Bronzefill printed parts.
Website: http://www.imaginables.com.au
3d model print parameters
Printed using- Colorfabb Shining Silver
- Colorfabb Bronze Fill
- Ultimaker Black Filament
- Ultimaker Black flexible Filament ...
