Lcd panel mount for prusa i3 3D for print
781 Views 1 Likes 0 Downloads Download
There were already a bunch of panels but none b...oth fit my LCD panel and worked well on a box frame Prusa i3.
Also none came with source files, just STLs. This has the SCAD so you can change anything you like.
UPDATE - the pushbutton prints kind of lousy for me as it was, so I put a tiny hole down the middle of it - this causes slicers to print it with a bunch of concentric shells rather than infill so you get a much sturdier print.
- 6-32 x 3" screw and nut...
Designer
John Ridley3d model description
Hinged/tiltable Front panel cover, knob and mount for Geeetech/RepRapDiscount LCD panel on a Prusa i3There were already a bunch of panels but none b...oth fit my LCD panel and worked well on a box frame Prusa i3.
Also none came with source files, just STLs. This has the SCAD so you can change anything you like.
UPDATE - the pushbutton prints kind of lousy for me as it was, so I put a tiny hole down the middle of it - this causes slicers to print it with a bunch of concentric shells rather than infill so you get a much sturdier print.
3d model print parameters
- Printed parts- 6-32 x 3" screw and nut...
