This is a earring with a Celtic knot, i have designed in several programs. I made the model slightly slanted. I recommend printing them in a slow prin...tspeed. I have painted the earrings after printing.
Raimon of IdeaLab
3d model print parameters
I have printed this model with white Ultimaker PLA. I have used a 0.2mm layer height and 18% infill. I have used a skirt and my printspeed was 25mm/s.... I used a 0.4mm nozzle and my extruder was 210 degrees Celcius.
3D file format: STL
Last update: 2019/09/12 at 20:09
Publication date: 2019/09/10 at 20:48