Lithophane box with options 3D for print
4401 Views 3 Likes 0 Downloads Download the piece here from 3dforprint
Option A - LED Light Setup
Option B - Tea Light Setup
The lids can be stacke...d under the base for storage when not in use.
-- Alternate Base Added, with Risers for Candles of different sizes
-- Base Mating Joint Added, to Allow for Bases to Stack
Please use a... high temperature material no matter what Lighting you intend to use. I used ABS/PC to print mine.
Glue may be required to get your panels to stay in place. Setting a 3mm border can eliminate the need for glue on all but the optional LED lithophane panel, which will still require glue to stay in place (0.15mm clearance on all panel edges), but will still also benefit from a border.
Designer
Chris3d model description
4x / 5x 120mm x 120mm x 3mm Lithophane Panels for tea lights or LEDsOption A - LED Light Setup
Option B - Tea Light Setup
The lids can be stacke...d under the base for storage when not in use.
-- Alternate Base Added, with Risers for Candles of different sizes
-- Base Mating Joint Added, to Allow for Bases to Stack
3d model print parameters
I use http://3dp.rocks/lithophane/ to generate the lithophanes, 120mm square, 3mm thick. I print them flat, at 0.05mm Layer Thickness.Please use a... high temperature material no matter what Lighting you intend to use. I used ABS/PC to print mine.
Glue may be required to get your panels to stay in place. Setting a 3mm border can eliminate the need for glue on all but the optional LED lithophane panel, which will still require glue to stay in place (0.15mm clearance on all panel edges), but will still also benefit from a border.
