Lothlorien brooch 3D for print
4013 Views 2 Likes 1 Downloads Download the piece here from 3dforprint
I designed two versions - one for a o...ne-colored version and another for a two-colored version.
FlashForge
Printer:
Creator Pro
Rafts:
Yes
Supports:
No
Resolution:
0.18mm
Infill:
30%
Notes:
For a one-colo...red version - I used a silver PLA:
Print "brooch_onepiece.stl" and done :-)
I used ERYONE Silky Shiny Filament PLA.
For a two-colored version, there are different ways:
I) If you have a printer with two nozzles:
a) You print "brooch_lowerpart.stl" and "brooch_upperpart.stl" in one job - done.
b) You print "brooch_lowerpart.stl" with one nozzle as first job and than print "brooch_upperpart.stl" together with "spacer.stl" as second job on top of the first print.
This what I did.
II) If you have a printer with one nozzle:
a) You print "brooch_onepiece.stl", pause at 2mm, swap material and continue printing.
b) You print "brooch_lowerpart.stl" with first material, leave the print on the plate. Than swap material and print "brooch_upperpart.stl" together with "spacer.stl" as second job on top of the first print.
Designer
Frank Penkert3d model description
This is the brooch which the fellowship got from Galadriel in Lothlorien from the "Lord of the Rings" movies.I designed two versions - one for a o...ne-colored version and another for a two-colored version.
3d model print parameters
Printer brand:FlashForge
Printer:
Creator Pro
Rafts:
Yes
Supports:
No
Resolution:
0.18mm
Infill:
30%
Notes:
For a one-colo...red version - I used a silver PLA:
Print "brooch_onepiece.stl" and done :-)
I used ERYONE Silky Shiny Filament PLA.
For a two-colored version, there are different ways:
I) If you have a printer with two nozzles:
a) You print "brooch_lowerpart.stl" and "brooch_upperpart.stl" in one job - done.
b) You print "brooch_lowerpart.stl" with one nozzle as first job and than print "brooch_upperpart.stl" together with "spacer.stl" as second job on top of the first print.
This what I did.
II) If you have a printer with one nozzle:
a) You print "brooch_onepiece.stl", pause at 2mm, swap material and continue printing.
b) You print "brooch_lowerpart.stl" with first material, leave the print on the plate. Than swap material and print "brooch_upperpart.stl" together with "spacer.stl" as second job on top of the first print.
