This Halloween, print Frankenstein's Monster. Remixed from our original model, he now has updated bolts, stitches, and a removable brain! You can even... use his head as a chip bowl for your Halloween party.
Make sure to cut off the bottom in your slicer to ensure a flat bottom. Ma...ke sure to print with some support to guarantee bolts do not droop. Also make sure your model has at least 8% infill or more to guarantee there are no holes in the top.
Head
Printed on a Type A Machines 2014 Series 1 3D Printer
Printed with Natural Clear PLA from 3D Solutech
Printed with support, 81 degree overhang angle
Printed with a brim, 20 lines
250 microns (0.25 mm layer height)
305 mm Height (12 inches)
40h Print Time
0.8 mm Shell Thickness
7% Fill Density
80 mm/s Print Speed
0.4 mm Z hop when retracting
265.73 m of filament used
230C Print Temperature
Brain
Printed on a Type A Machines 2014 Series 1 3D Printer
Printed with Natural Clear PLA from 3D Solutech
Printed with support, 55 degree overhang angle
Printed with a brim, 20 lines
250 microns (0.25 mm layer height)
140 mm Height (5.5 inches)
20h Print Time
0.8 mm Shell Thickness
8% Fill Density
80 mm/s Print Speed
0.4 mm Z hop when retracting
140.26 m of filament used
230C Print Temperature