Low-poly pikachu 3D for print
1004 Views 0 Likes 0 Downloads Download
I would love to keep sharing my projects with all of you. If you enjoy with my designs, I invite you to ...become a patron, you will get early access to my designs and exclusive content! Also, you can help with a small donation.
Patreon: http://www.patreon.com/flowalistik
Donations: http://www.paypal.me/flowalistik
---
Designing a low-poly Pokemon is the best way I found to represent the poor graphic quality the first Pokemon games had. So, here I present you the low-poly Pikachu, which is part of the Low-Poly project I'm developing.
3D printers allow to make real the idea of catching all Pokemon, and I'm currently working to make all the Pokemon I can. You can check the collection clicking here.
This model is 5cm tall approximately. The model from the picture was printed with a Prusa i3, 0.2mm layer height, 0.5mm nozzle, 45mm/s speed and a cooling fan (I really recommend this!). The material used in this model is 3mm high quality PLA.
It was designed so it doesn't need support material, although each printer is different and it may be more difficult to print it depending on the settings.
// This design is based on Pokemon
Designer
Agustin Flowalistik3d model description
Pokemon design to bring back your childhood!I would love to keep sharing my projects with all of you. If you enjoy with my designs, I invite you to ...become a patron, you will get early access to my designs and exclusive content! Also, you can help with a small donation.
Patreon: http://www.patreon.com/flowalistik
Donations: http://www.paypal.me/flowalistik
---
Designing a low-poly Pokemon is the best way I found to represent the poor graphic quality the first Pokemon games had. So, here I present you the low-poly Pikachu, which is part of the Low-Poly project I'm developing.
3D printers allow to make real the idea of catching all Pokemon, and I'm currently working to make all the Pokemon I can. You can check the collection clicking here.
This model is 5cm tall approximately. The model from the picture was printed with a Prusa i3, 0.2mm layer height, 0.5mm nozzle, 45mm/s speed and a cooling fan (I really recommend this!). The material used in this model is 3mm high quality PLA.
It was designed so it doesn't need support material, although each printer is different and it may be more difficult to print it depending on the settings.
// This design is based on Pokemon
