Mad rabbit - iphone car holder 3D for print
1190 Views 0 Likes 0 Downloads Download
Version 2.0 is here with 10% less plastic, screw-on heads and stronger body !!
FEATURES
- Easily drop in your phone even when connected to the power cable.
- Interchangeable parts for different cup holder's sizes and phones.
- Two point grip so it stays firmly put inside the cup holder.
- Designed to print with no support structures.
- No glue, screw-on head and snap on arms.
- Mad rabbit's eyes channel the sound coming from the iPhone to the front.
- The phone stays well balanced inside Mad rabbit even when placed on a table.
INSTRUCTIONS
There are 3 main parts: HEAD, BODY and ARMS
- HEAD: Designed to fit your phone with a light case (incipio, apple silicone case, etc). There are 3 head sizes: iPhone 5, 6 and 6plus. Print the right one for your phone.
- BODY: Screw with the HEAD of your choice.
- ARMS: Fit the ARMS through the bottom of the body and press the collar so it locks in over the first ring on the BODY. Designed for a 8cm diameter cup holder (mini cooper, fiat 500).
Note: I designed the ARMS's diameter for my car, if you want me to make a version for your own car just ask :) just remember to send me the diameter of the cup holder in centimetres.
TIP: You can stick strips of blue masking tape on the inside of the phone holder (bunny ears) so that they provide additional grip and protection for your phone.
Designer
Jose Luis3d model description
I love my iPhone 6 plus, but is is too big for a car´s cup holder. So I designed Mad Rabbit with practicality in mind, just drop in your phone and dr...ive! Hope you like it.Version 2.0 is here with 10% less plastic, screw-on heads and stronger body !!
FEATURES
- Easily drop in your phone even when connected to the power cable.
- Interchangeable parts for different cup holder's sizes and phones.
- Two point grip so it stays firmly put inside the cup holder.
- Designed to print with no support structures.
- No glue, screw-on head and snap on arms.
- Mad rabbit's eyes channel the sound coming from the iPhone to the front.
- The phone stays well balanced inside Mad rabbit even when placed on a table.
INSTRUCTIONS
There are 3 main parts: HEAD, BODY and ARMS
- HEAD: Designed to fit your phone with a light case (incipio, apple silicone case, etc). There are 3 head sizes: iPhone 5, 6 and 6plus. Print the right one for your phone.
- BODY: Screw with the HEAD of your choice.
- ARMS: Fit the ARMS through the bottom of the body and press the collar so it locks in over the first ring on the BODY. Designed for a 8cm diameter cup holder (mini cooper, fiat 500).
Note: I designed the ARMS's diameter for my car, if you want me to make a version for your own car just ask :) just remember to send me the diameter of the cup holder in centimetres.
TIP: You can stick strips of blue masking tape on the inside of the phone holder (bunny ears) so that they provide additional grip and protection for your phone.
