Make #3 - snap together garland 3D for print
4091 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This is a more challenging design to print- but well worth it! Each bead only has a small area of contact, so make sure your bed is level and use Blue Tape for good PLA adhesion. Slice with 2 shells (/perimeters) and 0% infill. We prefer coarse resolution (~0.25mm) purely for speed. To test your machine is tuned in, start off with the minimal 'Starter' set, before attempting an epic build!
Created in stunning Faberdashery Bling Bling Gold PLA and Arctic White PLA. Each 1 meter of Garland requires 51 pieces ~60g of material (~7m of 3mm / ~20m of 1.75mm filament). For bonus points build sets in complimentary colours :)
When you remove the finished pieces, they may require some 'fettling' to widen the hole. It shouldn't require too much force to insert the other half. The process is strangely addictive- and a great shared build with someone special... Snap Together!
Faberdashery are releasing daily, seasonal designs for you to print and enjoy. Join in the fun with our 25 Days of Making!
http://www.faberdashery.co.uk/25-days-of-making/
This is Make #3 of 25. Inspired by the great work of 'pmoews' (http://www.thingiverse.com/thing:177361).
Designer
Faberdashery3d model description
These little polyhedra snap together, for the ultimate festive garland! A little more challenging to make (see instructions), but a great project to b...uild with friends and family. Sit down with a glass of something sparkling and enjoy snapping your garland together!.This is a more challenging design to print- but well worth it! Each bead only has a small area of contact, so make sure your bed is level and use Blue Tape for good PLA adhesion. Slice with 2 shells (/perimeters) and 0% infill. We prefer coarse resolution (~0.25mm) purely for speed. To test your machine is tuned in, start off with the minimal 'Starter' set, before attempting an epic build!
Created in stunning Faberdashery Bling Bling Gold PLA and Arctic White PLA. Each 1 meter of Garland requires 51 pieces ~60g of material (~7m of 3mm / ~20m of 1.75mm filament). For bonus points build sets in complimentary colours :)
When you remove the finished pieces, they may require some 'fettling' to widen the hole. It shouldn't require too much force to insert the other half. The process is strangely addictive- and a great shared build with someone special... Snap Together!
Faberdashery are releasing daily, seasonal designs for you to print and enjoy. Join in the fun with our 25 Days of Making!
http://www.faberdashery.co.uk/25-days-of-making/
This is Make #3 of 25. Inspired by the great work of 'pmoews' (http://www.thingiverse.com/thing:177361).
