Jam with a real working egg shaker in minutes. Just pause halfway printing and fill with cut pieces of filament. Resume and shake that boogie down.
J...am with a real working egg shaker in minutes. Just pause halfway printing and fill with leftover filament. Resume and shake that boogie down.
Printing advice
Print solid with no infill and place it vertically on build-plate with heavy side down. Use the settings I have shown. You will need support, but only touching build-plate. You can use the 'Pause at Z height' plugin, or manually pause half way to fill. Fill the cup with left over filament, and resume. Note to be careful on the resuming layer. Advance the filament prior to resuming to make sure it continues with a good bond. It works well with ABS and PLA. Print any color you like even glow in the dark. See the attached pictures.
Thanks
I hope you like this design and I encourage you to encourage me. I am having fun creating new things and if you print this and have ideas or feedback, please click like and/or write me a comment. Thanks and may the force be with you.
3d model print parameters
1.60 meters 11 grams of 3mm filament
beans or rice...