Mask case (mask case) 3D for print
3824 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
There is an optional separation to place in the middle of the box... to separate a clean mask from a used one (for example when you go to a bar or restaurant). If you make this separation (center), it is advisable to do it at a slower speed and with more care, since the hooks are small and therefore very delicate.
Resolution: 0.20
Infill: 20%
Filament material: PLA
...
Designer
E-ELEKTRONIC3d model description
Box to store surgical masks. If you want to store a fpp2, you have to make it 120%.There is an optional separation to place in the middle of the box... to separate a clean mask from a used one (for example when you go to a bar or restaurant). If you make this separation (center), it is advisable to do it at a slower speed and with more care, since the hooks are small and therefore very delicate.
3d model print parameters
Supports: YesResolution: 0.20
Infill: 20%
Filament material: PLA
...
