Mask covid-19 and other / masque de protection 3D for print
7911 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Here is a loop that will allow you to make a protective mask
You will need to have: A paper towel, a handkerchief or a paper towel... (the ideal length is + - 30cm).
Two printed loops. 2 elastic bands. Thickness of layer 0.3
Shell thickness 1. Fill rate 25. Print temperature 220C °
Media type none.Protective mask
Here is a loop that will allow you to make a protective mask
You'll have to be equipped:
A paper towel, a tissue or a paper towel (the ideal length is +- 30cm). Two printed loops. 2 rubber bands
Layer thickness 0.2. Hull thickness 1. Filling rate 25
Printing temperature 200C°. Media type non
3D model size: X 41 × Y 20 × Z 5.23 mm...
Designer
BOXPLYER3d model description
Protection's maskHere is a loop that will allow you to make a protective mask
You will need to have: A paper towel, a handkerchief or a paper towel... (the ideal length is + - 30cm).
Two printed loops. 2 elastic bands. Thickness of layer 0.3
Shell thickness 1. Fill rate 25. Print temperature 220C °
Media type none.Protective mask
Here is a loop that will allow you to make a protective mask
You'll have to be equipped:
A paper towel, a tissue or a paper towel (the ideal length is +- 30cm). Two printed loops. 2 rubber bands
Layer thickness 0.2. Hull thickness 1. Filling rate 25
Printing temperature 200C°. Media type non
3d model print parameters
3D file format: STL3D model size: X 41 × Y 20 × Z 5.23 mm...
