Mason jar lamp lid 3D for print
1438 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Its a Lamp but U need a mason jar to make it work ;-)
Buy a ikea mason jar (others should work btw)
http://www.ikea.com/us/en/catalog/products/90227985/
Print a lid
Remove the lid from the mason jar and fit it with the new one.
Insert a fitting (E14 or E27) HEMMA ikea will work
http://www.ikea.com/gb/en/catalog/products/00067854/
Add a low power lamp (ideal are LED lamps but no more then 11Watts otherwise it will get to hot)
Close the lid ;-)
Turn on the light, marvel at your creation !!
Designer
Pieter Bos3d model description
Its a 3d printed lamp fitting lid for a ikea (and others) mason jar. It can hold the e14 and e27 standard fittings. Print the one you need. The opensc...ad file is a eye ball fit one (sorry).Its a Lamp but U need a mason jar to make it work ;-)
Buy a ikea mason jar (others should work btw)
http://www.ikea.com/us/en/catalog/products/90227985/
Print a lid
Remove the lid from the mason jar and fit it with the new one.
Insert a fitting (E14 or E27) HEMMA ikea will work
http://www.ikea.com/gb/en/catalog/products/00067854/
Add a low power lamp (ideal are LED lamps but no more then 11Watts otherwise it will get to hot)
Close the lid ;-)
Turn on the light, marvel at your creation !!
