Traffic cone for rc car office races 3D for print
862 Views 0 Likes 0 Downloads Download
e.g. for the "Team Associated APEX 1:18 Touring Cars", "HPI Micro RS4", "Maverick iON RX" or the "XRA...Y M18"
"curbs design"
second part is closed at the bottom to put weight in it for better stand
(water, sand, grit, ..)
printed in 3 Processes with Simplify3D
- red PLA . . / stop printing @ 20 mm
- white PLA / start printing @ 20mm , stop printing @ 50 mm
- red PLA . . / start printing @ 50 mm
I 2 Outline/Perimeter Shells I Filament length: ~ 4,8 m... I Plastic weight: ~ 39 g (0.08 lb) I
Designer
Bernd N.3d model description
Traffic Cone for RC Car races in the office :-)e.g. for the "Team Associated APEX 1:18 Touring Cars", "HPI Micro RS4", "Maverick iON RX" or the "XRA...Y M18"
"curbs design"
second part is closed at the bottom to put weight in it for better stand
(water, sand, grit, ..)
printed in 3 Processes with Simplify3D
- red PLA . . / stop printing @ 20 mm
- white PLA / start printing @ 20mm , stop printing @ 50 mm
- red PLA . . / start printing @ 50 mm
3d model print parameters
I PLA I nozzleØ: 0,5 mm I FilamentØ: 2,85 mm I 4 Top Solid Layers I 4 Bottom Solid Layers II 2 Outline/Perimeter Shells I Filament length: ~ 4,8 m... I Plastic weight: ~ 39 g (0.08 lb) I
