Pegboard holder for digital caliper 3D for print
1185 Views 0 Likes 0 Downloads Download
I use my caliper often enough that I put this together this holder to keep it han...dily stored on a pegboard.
It is designed to fit the "Pittsburgh" low-cost digital caliper from Harbor Freight, although I suspect it would work with other similar models.
My pegboard is 1/8" thick, with holes of approximately 3/16" diameter at 1-inch spacing. I believe this is a pretty standard configuration for pegboards, but you may want to double-check your pegboard is similar to ensure this will fit. It does NOT work with the thicker 1/4" pegboard.
Note that you will want to have supports turned on when printing.
Designer
Phil T3d model description
Store your digital caliper within easy reach on your 1/8" pegboard.I use my caliper often enough that I put this together this holder to keep it han...dily stored on a pegboard.
It is designed to fit the "Pittsburgh" low-cost digital caliper from Harbor Freight, although I suspect it would work with other similar models.
My pegboard is 1/8" thick, with holes of approximately 3/16" diameter at 1-inch spacing. I believe this is a pretty standard configuration for pegboards, but you may want to double-check your pegboard is similar to ensure this will fit. It does NOT work with the thicker 1/4" pegboard.
Note that you will want to have supports turned on when printing.
