Micro staunton chess set 3D for print

Designer

cmb27

3d model description

I call this a Micro Chess Set because each square of the board is 1" x 1" making the total board size 8" x 8". In order to artificially add weight to ...the pieces, each chess piece has a small magnet in its base, and each board square has a threaded hole for a set screw. The pieces are based on Staunton chess sets. The board was inspired by other chess boards on Thingiverse. In order to save time and resources a paper board has also been included; if you choose to use the paper board it is unnecessary to 3D print any of the board components or purchase the magnets and setscrews.

A complete set will require the following:

Light Colored Pieces
2 x Piece Bishop
1 x Piece King
2 x Piece Knight
8 x Piece Pawn
1 x Piece Queen
2 x Piece Rook

Dark Colored Pieces
2 x Piece Bishop
1 x Piece King
2 x Piece Knight
8 x Piece Pawn
1 x Piece Queen
2 x Piece Rook

Light Colored Board Squares
18 x Board Middle
3 x Board EdgeA
3 x Board EdgeB
3 x Board EdgeC
3 x Board EdgeD
1 x Board CornerA
1 x Board CornerC

Dark Colored Board Squares
18 x Board Middle
3 x Board EdgeA
3 x Board EdgeB
3 x Board EdgeC
3 x Board EdgeD
1 x Board CornerB
1 x Board CornerD

Other Components
32 x Magnet (1/4" diameter x 1/16" height)
http://www.digikey.com/product-search/en?keywords=469-1005-ND

64 x Set Screw (1/4"-20 thread x 3/16" length)
http://www.mcmaster.com/#92311a532/=10t4414 Read more

3d model print parameters

Printing Recommendations:
The pieces, not board, should be printed with 100% fill.
The knight will require a support, this can likely be added by yo...ur slicing software.
If printing the paper chess board, it is best to print it without scaling it up or down. Read more

Tags

Chess Magnet Magnetic Puzzle Staunton

License

CC Atribution