Mig-29 fulcrum kit card 3D for print
4064 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
...which you can n...ow hang from your christmas tree!
Came out way better than I expected it to, was worried I wouldn't capture its curves!
Have included 3 files, with and without the hanging loop, and a 3rd which will hang the jet off centre somewhat imitating the Puchakev's Cobra! (totally not a failed first attempt at placing the loop)
Enjoy~
Makes highly welcome, and tips hugely appreciated!
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament brand:
Geeete...ch
Filament color:
White
Filament material:
PLA
Notes:
Model should snap togther nice and tight, there is an added 0.2mm tolerance in each slit. If it is too tight, check for any elephants foot on the bottom of the print, a sharp blade can fix that. If it's too loose, nothing a little glue can't fix, but i'm hopeful it won't be! :')
Designer
Pete3d model description
The Mikoyan MiG-29 Fulcrum fighter jet, easy one of my top aircraft, ever since I saw it perform at an air show many years ago :')...which you can n...ow hang from your christmas tree!
Came out way better than I expected it to, was worried I wouldn't capture its curves!
Have included 3 files, with and without the hanging loop, and a 3rd which will hang the jet off centre somewhat imitating the Puchakev's Cobra! (totally not a failed first attempt at placing the loop)
Enjoy~
Makes highly welcome, and tips hugely appreciated!
3d model print parameters
Printer brand:Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament brand:
Geeete...ch
Filament color:
White
Filament material:
PLA
Notes:
Model should snap togther nice and tight, there is an added 0.2mm tolerance in each slit. If it is too tight, check for any elephants foot on the bottom of the print, a sharp blade can fix that. If it's too loose, nothing a little glue can't fix, but i'm hopeful it won't be! :')
