Flexi tiger shark (print-in-place) 3D for print
220 Views 1 Likes 0 Downloads Download
QIDI
Printer:
S-Box
Rafts:
No
Supports:
No
Infill:
15-20%
Filament brand:
any
Filament material:
PLA
Notes:
Laye...r Height: 0.1-0.3 mm
{Recommend}
Layer Height: 0.2mm
Print Speed: 60mm/s
Outer Wall Speed: 10mm/s
Z Seam Alignment: User Specified
Z Seam Position: Back Right (or "Back Left" if you want to 3D print the model facing right)
Designer
mosamosa saurus3d model print parameters
Printer brand:QIDI
Printer:
S-Box
Rafts:
No
Supports:
No
Infill:
15-20%
Filament brand:
any
Filament material:
PLA
Notes:
Laye...r Height: 0.1-0.3 mm
{Recommend}
Layer Height: 0.2mm
Print Speed: 60mm/s
Outer Wall Speed: 10mm/s
Z Seam Alignment: User Specified
Z Seam Position: Back Right (or "Back Left" if you want to 3D print the model facing right)
![Lovely Owl [FREE]](https://www.3dforprint.com/modelos/7785/lovely-owl-free1_medium.jpeg)
![Owl with wings spread [FREE]](https://www.3dforprint.com/modelos/7786/owl-with-wings-spread-free1_medium.jpeg)
![Stretching cat [free]](https://www.3dforprint.com/modelos/7787/stretching-cat-free1_medium.jpeg)
