Butterfly necklace printed in two colors.
I've printed the middle (color) layer in many different colors, but when I've use transparent PLA the effec...t was amazing!
3d model print parameters
For printer that is not able to print in multicoalor I've prepared object in parts
Print two : 2x_butterfly_TopAndBottom.stl
and one : 1Xbutterfly_c...enter.stl
For multi color print I've prepared butterfly.stl file.
First layer of color starts at 0.0 and ends on 0.4mm,
second starts at 0.6 and ends on 1 mm
third layer 1.2 to 1.4