This is a further developed version of the wall box ( https://www.youmagine.com/designs/wall-box ). Improvements to the previous version...:
- extended with a quick-change system
- Design optimizations
Here I have designed two small boxes for wall mounting with quick-change system in FreeCAD. The box is attached to a quick-change plate, so it can be removed quickly and without tools for cleaning or transporting the contents. The small video below explains the system.
Quick-change system → https://www.youmagine.com/designs/deltamount
The quick-release plate is fixed with 3 to 4mm countersunk screws or glued to a wall with double-sided adhesive tape.
It is important that the drying time of the tape is kept, depending on the adhesive can last up to 72 hours or 3 days, and the surface should be free of dust and grease.
The components can be printed from PLA or PETG, but all components should be made from the same material. Since PETG is more flexible, the spring mechanism will have echoed less.
The small cylinder is pressed into the hole on the back of the soap holder.
The boxes have the following dimensions without quick-release plate:
- Medium: 160 x 100 x 60 mm
- Large: 230 x 130 x 60 mm
I would be very happy about a small https://paypal.me/d23elt05a donation or a picture of your print, and would be happy if you visit my other Designs. :)