30x30 dual fan mount 3D for print
721 Views 0 Likes 0 Downloads Download
Seen several guys on YouTube who do not use heat sinks and simply just have the fans laying over the m...otor which seems to be popular.
Its designed to fit the stock brace on the Limitless and can be repositioned some what easily yet still maintain a good hold.
"Depending on your setup" there is a "lip" on this mount so it can rest upon the motor and also acts like a shield to help control airflow.
Once I test this (still waiting on Motor/ESC) I may add additional flow control to the design.
Comes with mounts to attach to the brace.
3 files include:
Dual30x30FanMount.stl
FanMount-1.stl
FanMount-2.stl
Note: I am awaiting hardware to mount this, once I receive I will post up another picture of it on the Limitless. I did basic tests and just did not have what I really wanted to mount this.
Here are the fans I used, BTW they blow "plenty" of air and can be used with a 2S Lipo which is my game plan. They are well made and have an aluminum case:
https://www.amazon.com/gp/product/B083DX5J57/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
3 permimeters
4 top 4 bottom layers
.02 layer height
20% infill
Note that since this has not been tested on o...r near hot electronics if I see any issues with melting I will print this out in PETG so just tossing that out there.
Designer
CLAYTONBAKERJR3d model description
Made my own fan mount for the Arrma Limitless.Seen several guys on YouTube who do not use heat sinks and simply just have the fans laying over the m...otor which seems to be popular.
Its designed to fit the stock brace on the Limitless and can be repositioned some what easily yet still maintain a good hold.
"Depending on your setup" there is a "lip" on this mount so it can rest upon the motor and also acts like a shield to help control airflow.
Once I test this (still waiting on Motor/ESC) I may add additional flow control to the design.
Comes with mounts to attach to the brace.
3 files include:
Dual30x30FanMount.stl
FanMount-1.stl
FanMount-2.stl
Note: I am awaiting hardware to mount this, once I receive I will post up another picture of it on the Limitless. I did basic tests and just did not have what I really wanted to mount this.
Here are the fans I used, BTW they blow "plenty" of air and can be used with a 2S Lipo which is my game plan. They are well made and have an aluminum case:
https://www.amazon.com/gp/product/B083DX5J57/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
3d model print parameters
All parts (ATM) were printed in PLA3 permimeters
4 top 4 bottom layers
.02 layer height
20% infill
Note that since this has not been tested on o...r near hot electronics if I see any issues with melting I will print this out in PETG so just tossing that out there.
