Mod to lrobertl feeder enhancement yoke 3D for print
1665 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
I modified the Yoke so that a locknut or nut can be retained for the M3 screw rather than just screwing into the plasti...c, there are a couple of versions of the yoke, With and without a filament guide to keep the filament in line.
I also use the modification of the bearing that adds the filament guide.
The extra width requires the use of some spacers behind the feeder assembly to pack away from the rear face and replace the screws with some slightly longer ones
Designer
Izzy3d model description
Modification to lRobertl YokeI modified the Yoke so that a locknut or nut can be retained for the M3 screw rather than just screwing into the plasti...c, there are a couple of versions of the yoke, With and without a filament guide to keep the filament in line.
I also use the modification of the bearing that adds the filament guide.
The extra width requires the use of some spacers behind the feeder assembly to pack away from the rear face and replace the screws with some slightly longer ones
