Modular drawers 2.0 3D for print
2169 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Modular Drawers Evo offers an improved interlocking system with fully customizable drawers.
Downl...oad: CGTrader | Cults | Etsy
CGTrader 30% Off Coupon: 680445AC4F05
As great as my HIVE - Stackable Hex Drawers are, they don't hold a whole lot in the drawers and the complex printing movements add a lot of time. I tried to fix this with my Modular Drawers. But these modules did not interlock. This is the interlocking version of my Modular Drawers 1.0
Modular Drawers 2.0 offers a sleek design free of complex print movements, decreasing print time while increasing storage volume. The dimensions are: 85 mm x 85 mm x 100 mm providing more than enough space to hold screws, capacitors, and other common small components.
Like this design? Please consider helping me replace filament https://www.paypal.me/O3DOfficial
Ender 2
Rafts:
No
Supports:
No
Resolution:
200-400
Infill:
0-5%
Notes:
The drawers should fit inside the modules... as is. It doesn't hurt to scale the modules to 101% and drawers remain at 100% (or drawers to 99% and modules 100%)
Print speed can be increased
Lower resolutions will print faster but may affect fit between slots and rails. If you have a problem with fit at lower res please tell me and I will upload a low res high speed module
I recommend printing with 5% infill
Combing cuts the time in half
Designer
Dan O'Connell3d model description
Modular Drawers Evo is now available for download!Modular Drawers Evo offers an improved interlocking system with fully customizable drawers.
Downl...oad: CGTrader | Cults | Etsy
CGTrader 30% Off Coupon: 680445AC4F05
As great as my HIVE - Stackable Hex Drawers are, they don't hold a whole lot in the drawers and the complex printing movements add a lot of time. I tried to fix this with my Modular Drawers. But these modules did not interlock. This is the interlocking version of my Modular Drawers 1.0
Modular Drawers 2.0 offers a sleek design free of complex print movements, decreasing print time while increasing storage volume. The dimensions are: 85 mm x 85 mm x 100 mm providing more than enough space to hold screws, capacitors, and other common small components.
Like this design? Please consider helping me replace filament https://www.paypal.me/O3DOfficial
3d model print parameters
Printer:Ender 2
Rafts:
No
Supports:
No
Resolution:
200-400
Infill:
0-5%
Notes:
The drawers should fit inside the modules... as is. It doesn't hurt to scale the modules to 101% and drawers remain at 100% (or drawers to 99% and modules 100%)
Print speed can be increased
Lower resolutions will print faster but may affect fit between slots and rails. If you have a problem with fit at lower res please tell me and I will upload a low res high speed module
I recommend printing with 5% infill
Combing cuts the time in half
