Junction box 3D for print
1232 Views 0 Likes 0 Downloads Download
Through this link you can export Parasolid, SLDPRT and other formats:
https://...cad.onshape.com/documents/327171c9244b0ec619ab7436/w/2aeedbd1addbdc117482fa1d/e/dbec131d3255350e55219099
If you have a free Onshape account you can also edit it to fit your project.
- As needed, you can print additional "hole shrinkers" to makes the holes a bit smaller. because I didn't design for tolerances,... there's no gap in between the hole shrinker and the box. Print these bits with a horizontal expansion of -0.1mm in Cura to ensure they fit properly (or undersize them on the appropriate axes).
Designer
Erik de Bruijn3d model description
A little junction box to fit some electronics and wires on the wallThrough this link you can export Parasolid, SLDPRT and other formats:
https://...cad.onshape.com/documents/327171c9244b0ec619ab7436/w/2aeedbd1addbdc117482fa1d/e/dbec131d3255350e55219099
If you have a free Onshape account you can also edit it to fit your project.
3d model print parameters
- Print the main box- As needed, you can print additional "hole shrinkers" to makes the holes a bit smaller. because I didn't design for tolerances,... there's no gap in between the hole shrinker and the box. Print these bits with a horizontal expansion of -0.1mm in Cura to ensure they fit properly (or undersize them on the appropriate axes).
