BEEBOX SET...( #DAGOMERLIN )
Last minute: (29/11/2017) By general request (from myself and some others) I add some boxes whose opening is truncated (...see the last picture...) These boxes must be assembled by 2, 3 or more and glued (the super strong Scotch glue does the job....)
At the origin of the project is the idea of modelling a honeycomb. The cells (or cells) of a honeycomb are tubes of hexagonal cross-section whose bottom is not flat, but rather resembles a roof made up of 4 diamonds. These cells can be interlocked, hence the idea of this set of boxes. The diamonds have become squares for balance.
The possible assemblies are multiple: the limit is that of your imagination! The collars allow the boxes to be combined without any glue (except for the last assembly proposed as an example).
Set composition: cellular bottom boxes of several heights, extensions, assembly collars, cover, and flat bottom boxes.
Use: see pictures! You can even consider assembling a pill dispenser using the 7-element collar!
3d model print parameters
The photographed makes were made with PLA (Chromatik). Outside the cover no support (or raft or raft) is necessary (just sometimes an improvement of t...he tray).
The filling is 17% and the quality is standard ( 0.15mm layer thickness)