Motorized roller blinds 3D for print
2591 Views 1 Likes 1 Downloads Download
Made with easy installation and small space requirements ...in mind,
without modifying the original blinds to much.
Everything done here can easily be reversed to the original state.
To build this thing you need:
- compatible roller blinds
- 28BYJ-48 stepper motor
- ULN3009 stepper motor driver
- ESP8266/Ardu...ino or similar
#Step 1: Removing the original blind mounts and pulley chain
This step is quite straight forward, the mounts are simply pressed into the main rail of the LIDL blinds. Just remove the one on the side of the pull chain, by pushing the mount out with a flat screwdriver.
Now that you removed the blind mounts on the pulley side, simply remove the pulley from the main roller, also remove the thick white spacer on the opposite side of the blind.
#Step 2: Prepare motor mount
Take the printed motor mount and insert the motor into the housing.
You need to disassemble the stepper motors plug to be able to fit the
cables through the small cable channel in the motor mount.
After slotting the cables through, carefully push the motor into the mount and secure it with screws, if necessary.
Now reassemble the stepper plug.
#Step 3: Put everything back together
Now that you've prepared your motor, take the free_rotator and insert it into the roller blinds axle, on the opposite side of where the motor will go.
Push the blinds onto the mounting point still left on the main rail and insert the motorized_rotator into the other side of the blinds axle.
Now push the motor_mount onto the main rail and into the slot in the back of the motorized rotator.
The mount should friction fit perfectly into the rail and keep your blind nicely centered, you might have to adjust the pressfit end of the blinds on the main rail to match the new position of the blinds main roller.
Designer
Florian L.3d model description
Small smarthome motor upgrade for roller blinds recently sold at LIDL or compatible models.Made with easy installation and small space requirements ...in mind,
without modifying the original blinds to much.
Everything done here can easily be reversed to the original state.
3d model print parameters
#RequirementsTo build this thing you need:
- compatible roller blinds
- 28BYJ-48 stepper motor
- ULN3009 stepper motor driver
- ESP8266/Ardu...ino or similar
#Step 1: Removing the original blind mounts and pulley chain
This step is quite straight forward, the mounts are simply pressed into the main rail of the LIDL blinds. Just remove the one on the side of the pull chain, by pushing the mount out with a flat screwdriver.
Now that you removed the blind mounts on the pulley side, simply remove the pulley from the main roller, also remove the thick white spacer on the opposite side of the blind.
#Step 2: Prepare motor mount
Take the printed motor mount and insert the motor into the housing.
You need to disassemble the stepper motors plug to be able to fit the
cables through the small cable channel in the motor mount.
After slotting the cables through, carefully push the motor into the mount and secure it with screws, if necessary.
Now reassemble the stepper plug.
#Step 3: Put everything back together
Now that you've prepared your motor, take the free_rotator and insert it into the roller blinds axle, on the opposite side of where the motor will go.
Push the blinds onto the mounting point still left on the main rail and insert the motorized_rotator into the other side of the blinds axle.
Now push the motor_mount onto the main rail and into the slot in the back of the motorized rotator.
The mount should friction fit perfectly into the rail and keep your blind nicely centered, you might have to adjust the pressfit end of the blinds on the main rail to match the new position of the blinds main roller.
