Open book harry potter wand stand 3D for print
100 Views 0 Likes 0 Downloads Download
You can stack them together as you like. The stand pieces come in variations to hold 1-9 wands. To display more wands just glue more of the stands together. Each version of the stand is also available with optional wall mounting holes so you can put it on a shelf or directly screw it to the wall.
The models don’t need any printing supports and the stand can even be printed easily without infill. The open book binding shaped front piece prints separately. You can make it any colour you like. I used Fillamentum PLA Crystal Clear and Chocolate Brown.
At 100% scale the dimensions are:
Width approx. 18 mm
Length approx. 245 mm
Height approx. 123 mm
PRINTER SETTINGS
We recommend a layer height of 0.2 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. No supports needed. Printing settings will vary greatly depending on your specific printer.
If you’re interested in getting the wands you can find them here: https://cults3d.com/en/3d-model/game/harry-potter-wand-collection-3d-mon
If you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: https://3d-mon.com/preorder
This model was created by Filip from our 3Demon team. We are a group of modelling and 3d printing enthusiasts, who work in a 3D makerspace located in Prague, Czech Republic. We make cosplay accessories, technical gadgets and much more. Have a look at our Facebook page or visit our website to find out more about us:
https://facebook.com/3Demon.3Dprint
https://3d-mon.com
Designer
3D-mon3d model description
This is a wand stand to display as many wands as you like. The design is inspired by the Wizarding World logo. When it is filled with wands it resembl...es an open book. It is purposefully minimalistic so the beauty of the wands can be the main star of the show.You can stack them together as you like. The stand pieces come in variations to hold 1-9 wands. To display more wands just glue more of the stands together. Each version of the stand is also available with optional wall mounting holes so you can put it on a shelf or directly screw it to the wall.
The models don’t need any printing supports and the stand can even be printed easily without infill. The open book binding shaped front piece prints separately. You can make it any colour you like. I used Fillamentum PLA Crystal Clear and Chocolate Brown.
At 100% scale the dimensions are:
Width approx. 18 mm
Length approx. 245 mm
Height approx. 123 mm
PRINTER SETTINGS
We recommend a layer height of 0.2 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. No supports needed. Printing settings will vary greatly depending on your specific printer.
If you’re interested in getting the wands you can find them here: https://cults3d.com/en/3d-model/game/harry-potter-wand-collection-3d-mon
If you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: https://3d-mon.com/preorder
This model was created by Filip from our 3Demon team. We are a group of modelling and 3d printing enthusiasts, who work in a 3D makerspace located in Prague, Czech Republic. We make cosplay accessories, technical gadgets and much more. Have a look at our Facebook page or visit our website to find out more about us:
https://facebook.com/3Demon.3Dprint
https://3d-mon.com
