N95 masks against coronavirus covid19 #hackthepandemic 3D for print


 N95 masks against coronavirus covid19 #hackthepandemic  3d model for 3d printers

 N95 masks against coronavirus covid19 #hackthepandemic  3d model for 3d printers
 N95 masks against coronavirus covid19 #hackthepandemic  3d model for 3d printers N95 masks against coronavirus covid19 #hackthepandemic  3d model for 3d printers N95 masks against coronavirus covid19 #hackthepandemic  3d model for 3d printers
510 Views 0 Likes 5 Downloads Download

Designer

COOPPER3D

3d model description

Hospitals around the world are close to running out of N95 masks in the middle of the worst pandemic of XXI century! Our purpose as a company has alwa...ys been related to making a positive impact and tackle #GlobalChallenges through #Innovation , #Nanotechnology and #AntimicrobialMaterials . Our purpose leads us to solve this problem in a low-cost, quick, and descentralized way through #DistributedManufacturing . We propose a #Reusable , #Customizable , #Modular , #Antimicrobial and #Antiviral #3Dprinted #RespiratorSystem made with #Copper3D high quality nanocomposite #PLACTIVE .
ABOUT NANOHACK
Our innovation is inspired by the scarcest product these days, the famous and scarce N95 masks.
Basically, there is a breakdown in the global stock of this product, and it is a basic necessity, especially for Healthcare personnel who are at the forefront of fighting this disease. In many countries the authorities have also recommended the use of these masks (or similar) on public transport. These masks, despite being effective, also have some problems such as a short lifecycle (about 8 hours), and have another even more serious problem. Respiratory viruses, specifically SARS-Cov-2 (COVID-19) can live up to 72 hours on different surfaces. This is a problem since using a conventional mask, at the end of the day we would have a high viral/bacterial load trapped within millimeters of our nose and mouth, further exposing ourselves to these dangerous microbes.
NANOHACK, THE OPEN SOURCE RESPIRATOR MASK
NanoHack was inspired by a great global pandemic. The most radical innovations are born from crises, which is why NanoHack is a unique design.
ANTIMICROBIAL/ANTIVIRAL
Manufactured with PLACTIVE® an innovative Nanocomposite developed with a high quality PLA and a patented, scientifically validated and highly effective Nano-Copper additive.
REUSABLE & RECYCLABLE
You can use this mask any times you want. The increasing use of single-used surgical masks and N95 respirators will have a detrimental effect in the ecosystem. To prevent this detrimental effect in our environment, NanoHack will be made with recyclable material.
FLAT PATTERN
Facilitate manufacturing and transportation with massive shippings all over the world and to rural settings.
MODULAR FILTRATION SYSTEM
NanoHeck will incorporate a novel modular fine particle filtration system manufactured with a material using copper nanocomposite proven to deactivate viruses. This novel filtration system includes a several layers with different geometries to provide an effective fine particle filtration. Furthermore, this system can house third party filtration materials, such as non-woven propylene, clothing, sponges, or textiles.
THERMOFORMING CAPABILITIES
At 55º - 60º C to allow the use of hair dryers or warm water to give the correct shape of the anatomy of any face.
CONTROL OF THE FILTRATION AND AIR INTAKE
Prolong use of N95 respirators have shown to reduce lung capacity. These single-use respirators do not allow the regulation of air intake or particle size. NanoHack incorporates a modular filtration disc that can effectively regulate the air intake and the particle size. This system that can be customized by using third party filtration non-woven propylene, clothes, sponges, and different textiles to reduce the level of filtration.
NANOHACK ASSEMBLY
NanoHack was conceived as a product that is 3D printed on a plane and then assembled by each user with very simple elements and procedures. Please follow the instructions to obtain a safe and correct use of NanoHack.


3d model print parameters

Print the pieces with 20% infill, without support or rafts.
Heat the NanoHack to 55º-60º C with a hairdryer or hot water. The circular part has to ...be intact, that's why it's thicker so that it doesn't deform.
When softening, bring together the nose wings and adjustment wings located on the lower jaw. You can glue them to fix them better if you want.
Heat it up again and put it on your face for final adjustments. Make sure it's not too hot! If you feel that there is some part of the mask that does not fit well or is too tight, you can put a small piece of soft rubber in the contact areas.
Screw the "cover" on with one or two additional filters. If you use a filter, you can use a circular piece (single or double) of a conventional mask (nonwoven propylene) or add a round facial cotton pad for makeup. Half pad can make breathing easier.
Add the elastics/straps


Tags

3dvscovid19 Hackthepandemic Covid19 Coronavirus N95 masks

License

CC Atribution

Related 3d models with tags

NANOHACK 2.0 - N95 MASKS AGAINST CORONAVIRUS COVID19 #HACKTHEPANDEMIC

NANOHACK 2.0 - N95 MASKS AGAINST CORONAVIRUS COVID19 #HACKTHEPANDEMIC

Personal Mask *Not A Medical Device*

Personal Mask *Not A Medical Device*

KEYCHAIN TOUCHES SURFACES, covid19, coronavirus

KEYCHAIN TOUCHES SURFACES, covid19, coronavirus

Functional Gas Mask V2

Functional Gas Mask V2

Covid-19 Dechatlon / TheNice / Other mask All 3M anti-virus cartridge versions Adapter

Covid-19 Dechatlon / TheNice / Other mask All 3M anti-virus cartridge versions Adapter

Covid-19 Dechatlon / TheNice / Other mask Hepa Filter Adapter

Covid-19 Dechatlon / TheNice / Other mask Hepa Filter Adapter

Another Cap for COVID-19 MASK

Another Cap for COVID-19 MASK

New Chinstraps against the new coronavirus (COVID-19) #3DvsCOVID19

New Chinstraps against the new coronavirus (COVID-19) #3DvsCOVID19

Protective Mask 3D printer

Protective Mask 3D printer

Mask Covid19 with pillars

Mask Covid19 with pillars

CLICK MASK

CLICK MASK

Mask COVID-19

Mask COVID-19

Coronavirus glasses (Covid-19

Coronavirus glasses (Covid-19

touchless elbow handle (ANY HANDLE)

touchless elbow handle (ANY HANDLE)

Covid 19 Coronavirus Breather respirador

Covid 19 Coronavirus Breather respirador

Quarantine Mask Glass

Quarantine Mask Glass

Mask COVID-19 and other / Masque de protection

Mask COVID-19 and other / Masque de protection

COVID-19 Mask Cap, Covered

COVID-19 Mask Cap, Covered

New Year Silhouette Art

New Year Silhouette Art

PIECE2 covid19 FREE

PIECE2 covid19 FREE

PIECE1 covid19 FREE

PIECE1 covid19 FREE

visor

visor

Eyes/Face shield

Eyes/Face shield

3DVerkstan Based Face Shield - Supercell Remix

3DVerkstan Based Face Shield - Supercell Remix

Spray protection visor - DAGOMA version without elastic - Covid-19

Spray protection visor - DAGOMA version without elastic - Covid-19

protective screen for glasses

protective screen for glasses

Covid-19 mask

Covid-19 mask