Full nautilus shell (project shellter) 3D for print
834 Views 0 Likes 0 Downloads Download
Originally done and shared October 21st 2011 - this is for the archive -
This original model by tc_fea was one of the many things that drove me on to make another 3D printer, it's great and I always wanted to make a complete shell.
So this is a 2.5X scales version with both sides.
This was also an experiment for me with using a small fan blowing across the build platform (Still use a heated bed) - if you look at the picture with the inside prints, you can see the effect of having a fan or not, on one half the inside is more loose then the other, it didn't make a difference to the outside but you get the idea.
Designer
Richard Horne3d model description
Scale if needed to be smaller (Or BIGGER !), print and stick together. This was printed at 60mm/sec with 2 extra 'shells'(Get it) and 0% infill Admire... your achievement and maybe help save the planet. Give it to a hermit Crab for Project Shellter, this one could fit a small whale!Originally done and shared October 21st 2011 - this is for the archive -
This original model by tc_fea was one of the many things that drove me on to make another 3D printer, it's great and I always wanted to make a complete shell.
So this is a 2.5X scales version with both sides.
This was also an experiment for me with using a small fan blowing across the build platform (Still use a heated bed) - if you look at the picture with the inside prints, you can see the effect of having a fan or not, on one half the inside is more loose then the other, it didn't make a difference to the outside but you get the idea.
