Ndimensional 3D for print
1783 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
For fixing the wires on paper craft ships in 1.2...50 scale I needed a scaffold to hold the wires / string above the model. The end of the string was glued to the model and the other end hold in air above until it was fixed at another place on the model. Also it needed to be flexible - you need two small pegs to fix the traverse to the posts.
- two small "toy" pegs...
Designer
Ndimensional3d model description
Fixing scaffold for modeling. Adjustable height from 10 mm to 300 mm height, Width 150 mm or 250 mm.For fixing the wires on paper craft ships in 1.2...50 scale I needed a scaffold to hold the wires / string above the model. The end of the string was glued to the model and the other end hold in air above until it was fixed at another place on the model. Also it needed to be flexible - you need two small pegs to fix the traverse to the posts.
3d model print parameters
- Used PLa but ABS should also be ok or everything elseif not too soft.- two small "toy" pegs...
