Nema17 4:1 gearbox 3D for print
2747 Views 4 Likes 7 Downloads Download
Here's a 4:1 gearbox for NEMA17 stepper motors that utilizes herringbone gears for smoo...th power transfer and minimal side-thrust from the gears.
THIS DESIGN MAY NOT WORK FOR YOUR PRINTER WITHOUT ADJUSTMENTS
Parts have been designed to be 0.3mm larger. This should be taken taken into account when printing.
If you are unable to assemble the parts as shown or if there is any backlash in the assembled gearbox, you will need to modify the design files/change part dimensions to fit your printer.
For more details, assembly steps, design files, and a guide to designing printable gears in Autodesk Inventor see my post at https://0x7d.com/2014/08/41-gearbox-for-nema-17-stepper-motors/.
- 4x 16mm M3 Screws
- 4x 1.6mm M3 Low-Profile Nuts...
Designer
Kevin3d model description
A printable gearbox that fits standard NEMA17 stepper motors.Here's a 4:1 gearbox for NEMA17 stepper motors that utilizes herringbone gears for smoo...th power transfer and minimal side-thrust from the gears.
THIS DESIGN MAY NOT WORK FOR YOUR PRINTER WITHOUT ADJUSTMENTS
Parts have been designed to be 0.3mm larger. This should be taken taken into account when printing.
If you are unable to assemble the parts as shown or if there is any backlash in the assembled gearbox, you will need to modify the design files/change part dimensions to fit your printer.
For more details, assembly steps, design files, and a guide to designing printable gears in Autodesk Inventor see my post at https://0x7d.com/2014/08/41-gearbox-for-nema-17-stepper-motors/.
3d model print parameters
- 4x 20mm M3 Screws- 4x 16mm M3 Screws
- 4x 1.6mm M3 Low-Profile Nuts...
