Nerf rapidstrike lipo battery housing 3D for print
1059 Views 1 Likes 0 Downloads Download
This design allows you to mod your Nerf Rapidstrike without destroying the original battery housing. Simply print it, install the blank 2.5mm copper wires to fit in the designated slots and solder the contraplug to it. Attach the plug from the lipo to the contraplug and you are ready to go (uh.... Shoot!!)
If your Nerf is equiped with stock flywheel motors use a 2S LiPo, if your Nerf is 'upgraded' with 12V motors you can use a 3S LiPo.
- Contraplug to connect the LiPo plug to the external wires
- Wiring (2.5mm2)
- Soldering skills ;-)...
Designer
Bert-Jan Walker3d model description
If you want to power your Nerf Rapidstrike with a LiPo instead of the stock C-cells without destroying your original battery housing you need to check... this great design!This design allows you to mod your Nerf Rapidstrike without destroying the original battery housing. Simply print it, install the blank 2.5mm copper wires to fit in the designated slots and solder the contraplug to it. Attach the plug from the lipo to the contraplug and you are ready to go (uh.... Shoot!!)
If your Nerf is equiped with stock flywheel motors use a 2S LiPo, if your Nerf is 'upgraded' with 12V motors you can use a 3S LiPo.
3d model print parameters
- LiPo 2S or 3S- Contraplug to connect the LiPo plug to the external wires
- Wiring (2.5mm2)
- Soldering skills ;-)...
