Nerf pistol with clip 3D for print
1731 Views 0 Likes 3 Downloads Download
Files have been moved to Cults3D
5 days of development and we got this, a handheld and quickly rel...oadable nerfgun that is also super easy to build!
2016-10-30 edit: Updated body2 to v1.1, it's easier to assemble with a thinner cover for the screwholes. The cover is there in the stl to make sure it prints correctly with as little support as possible.
2017-01-02 edit: Added final parts for 75mm long nerfs, reprint the files ending with V1.2.
Features:
-Longer/wider clip and adjusted geometry on the bodies to accommodate longer darts.
-Moved slide rail down a bit to make it easier to put together and take apart.
-Strengthened the slide where it most often broke/delaminated
-More gap added to make sure the firing bolt does not hit the slide reload mechanism.
You can find videos about this project and others at my youtube channel:
https://www.youtube.com/mrcrankyfaceprojects
Check me out at:
Youtube: http://www.youtube.com/c/MrCrankyfaceProjects
Instagram: https://www.instagram.com/mr.crankyface/
3d hubs: https://www.3dhubs.com/malm%C3%B6/hubs/mrcrankyface
Patreon: http://patreon.com/Mrcrankyface
Some parts will need support but should be easy to get at and remove with a sharp knife or similar.
You will need 3 small rubber bands and 7 M3...x10 or similar.
Designer
MrCrankyface3d model description
Quickly reloadable nerf pistol, fun little toy.Files have been moved to Cults3D
5 days of development and we got this, a handheld and quickly rel...oadable nerfgun that is also super easy to build!
2016-10-30 edit: Updated body2 to v1.1, it's easier to assemble with a thinner cover for the screwholes. The cover is there in the stl to make sure it prints correctly with as little support as possible.
2017-01-02 edit: Added final parts for 75mm long nerfs, reprint the files ending with V1.2.
Features:
-Longer/wider clip and adjusted geometry on the bodies to accommodate longer darts.
-Moved slide rail down a bit to make it easier to put together and take apart.
-Strengthened the slide where it most often broke/delaminated
-More gap added to make sure the firing bolt does not hit the slide reload mechanism.
You can find videos about this project and others at my youtube channel:
https://www.youtube.com/mrcrankyfaceprojects
Check me out at:
Youtube: http://www.youtube.com/c/MrCrankyfaceProjects
Instagram: https://www.instagram.com/mr.crankyface/
3d hubs: https://www.3dhubs.com/malm%C3%B6/hubs/mrcrankyface
Patreon: http://patreon.com/Mrcrankyface
3d model print parameters
Some parts will need support but should be easy to get at and remove with a sharp knife or similar.
You will need 3 small rubber bands and 7 M3...x10 or similar.
