Nozzly mascot stratomaker 3D for print
2702 Views 2 Likes 3 Downloads Download the piece here from 3dforprint
From its 6 cm height, it will be, if you wish, yo...ur office companion to welcome your phone or the soap in your bathroom.
Thanks to an empty 3D printing and a source of light, Nozzly will enlighten you with her smile.
A key version has been made with the small falling filament to allow a key ring attachment. Longer but still cute flexible printing, photo to come...
Currently monochrome but an evolution will be possible in two-tone when its creator will discover the joy of the double extruder.
Filling (Infill): 0%
Print Speed: 30mm/s
Shell Tickness: 0.8mm
Support: None (None)
Platform Adhesion: None (None)
Print Time: 1h....
Printed on an original Anet A8.
Print on Anet A8 full stock.
Dimension (W x H x D): 66mm x 54mm x 49mm
Size (L x H x D) : 2,60" x 2.13" x 1.93" x 2.60
Designer
SYLVESTRE-BDR3d model description
Small printing nozzle named Nozzly,it will be born in all simplicity after just one hour of waiting.From its 6 cm height, it will be, if you wish, yo...ur office companion to welcome your phone or the soap in your bathroom.
Thanks to an empty 3D printing and a source of light, Nozzly will enlighten you with her smile.
A key version has been made with the small falling filament to allow a key ring attachment. Longer but still cute flexible printing, photo to come...
Currently monochrome but an evolution will be possible in two-tone when its creator will discover the joy of the double extruder.
3d model print parameters
Layer Height: 0.2mmFilling (Infill): 0%
Print Speed: 30mm/s
Shell Tickness: 0.8mm
Support: None (None)
Platform Adhesion: None (None)
Print Time: 1h....
Printed on an original Anet A8.
Print on Anet A8 full stock.
Dimension (W x H x D): 66mm x 54mm x 49mm
Size (L x H x D) : 2,60" x 2.13" x 1.93" x 2.60
