Steampunk iron man hand 3D for print
3428 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
While many of the printable prosthesis de...signs have come a long way in proving it's function. They still have a long way to go in aesthetics. This iteration focuses on building upon that base but making it more creative, fun and acceptable to children to alleviate the psychological stress of having to use a prosthesis.
This is a first version. Most of the aesthetic and base structure is complete. A level of refinement & revision towards the function and usability is required. Future improvements include: variable finger tension, rotatable thumb.
Printing requirements:
You will require 5 "turrets" for each string
4 sets of the finger parts. (all fingers use the same part) except for the thumb which has it's own 2 joint set.
the stretchy cord should be tied to the circle to keep it flush in the system.
To assemble the top piece, press the corner furthest away from the thumb first.
Very tight tolerances. Make sure you test 1 set of finger joints for tolerance first before you begin. The skin should be tight enough on the internal part that they shouldn't slide around. This is essential to keep the pins in.
Please feel free to iterate and improve on this design.
Designer
Valcrow3d model description
Steampunk Iron Man Hand. no fasteners required. First iteration. Work in progress, feel free to contribute!While many of the printable prosthesis de...signs have come a long way in proving it's function. They still have a long way to go in aesthetics. This iteration focuses on building upon that base but making it more creative, fun and acceptable to children to alleviate the psychological stress of having to use a prosthesis.
This is a first version. Most of the aesthetic and base structure is complete. A level of refinement & revision towards the function and usability is required. Future improvements include: variable finger tension, rotatable thumb.
Printing requirements:
You will require 5 "turrets" for each string
4 sets of the finger parts. (all fingers use the same part) except for the thumb which has it's own 2 joint set.
the stretchy cord should be tied to the circle to keep it flush in the system.
To assemble the top piece, press the corner furthest away from the thumb first.
Very tight tolerances. Make sure you test 1 set of finger joints for tolerance first before you begin. The skin should be tight enough on the internal part that they shouldn't slide around. This is essential to keep the pins in.
Please feel free to iterate and improve on this design.
