Omnidroid - pixar's incredibles 3D for print
1892 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This week I'm bringing you guys the Omnidroid from the Incredibles. I modeled this in Fusion 360 using sketches and various... tools to get the shapes here.
It's mostly simple shapes like a big sphere with smaller spheres attaching the legs. The feet are pretty basic shapes that are arranged in a plus shape. The legs are really where the bulk of the design work comes in. You can see what I did in the video but I basically just took a sketched line, and lofted a rectangle shape along the line. Then I created an 's' shape on the side of it and patterned that long the path of the leg.
Then after I printed it (settings below), my wife sanded it, sprayed it with filler primer and sanded it some more. Then she used her airbrush to paint it black. The only thing left after that was to paint the eye red. She did this with a paintbrush and some acrylic paint.
Print Settings:
Printer: Robo3D R1
Filament: Hatchbox PLA
Layer Height: 0.3mm
Infill: 20%
Supports: Yes
Raft: Yes
Designer
ChaosCoreTech3d model description
A fun omnidoird to print.This week I'm bringing you guys the Omnidroid from the Incredibles. I modeled this in Fusion 360 using sketches and various... tools to get the shapes here.
It's mostly simple shapes like a big sphere with smaller spheres attaching the legs. The feet are pretty basic shapes that are arranged in a plus shape. The legs are really where the bulk of the design work comes in. You can see what I did in the video but I basically just took a sketched line, and lofted a rectangle shape along the line. Then I created an 's' shape on the side of it and patterned that long the path of the leg.
Then after I printed it (settings below), my wife sanded it, sprayed it with filler primer and sanded it some more. Then she used her airbrush to paint it black. The only thing left after that was to paint the eye red. She did this with a paintbrush and some acrylic paint.
Print Settings:
Printer: Robo3D R1
Filament: Hatchbox PLA
Layer Height: 0.3mm
Infill: 20%
Supports: Yes
Raft: Yes
![Front damper bridge [Reely Rhino]](https://www.3dforprint.com/modelos/4107/front-damper-bridge-reely-rhino1_medium.jpg)
