Open your heart, dualcolor 3D for print
1408 Views 0 Likes 1 Downloads Download
There is 1 file for a single colored box, and one file for each color of the dualcolored box.
The bottom and lid of this heartshaped box are connected with a filmhinge so you cannot loose the lid. It snaps shut with a little twist.
I made some slight changes to get an easier snap . They are in heartcontainer fdm filmhinge4.stl
This was printed in PLA on a prusa mendel. I am very curious how this will print on other types of 3dprinters so please let me know your results.
the size for printing is 164 x 147 x 33 mm
The closed box is 100 x 100 x 35mm
Sofar I have seen very nice result from makerbots even scale down to 0.6 the hinges work great.
for the single colored box I used Slic3r with concentric infill for bottom,
bottom layer 0,4mm
next layers 0,3mm On a Prusa 2 with 0.5mm nozzle
To get good filmhinges it will help if you have a concentric first layer infill, have a nicely printed first layer and carefully remove the print from the bed.
For the dual colored box I used Cura 13.12 with a wipetower. The oozeshield didn´t work well with this design. first layer 0,25, other layers 0,15mm. Printed on a mowi printer with two 0,35mm nozzles.
Designer
Monique de Wilt3d model description
So you have opened your heart for this wonderful person. Now you can show him or her what is inside. Here is the box to present your Valentines gift i...n style. The bottom and lid are bonded together so they'll never loose each other.There is 1 file for a single colored box, and one file for each color of the dualcolored box.
The bottom and lid of this heartshaped box are connected with a filmhinge so you cannot loose the lid. It snaps shut with a little twist.
I made some slight changes to get an easier snap . They are in heartcontainer fdm filmhinge4.stl
This was printed in PLA on a prusa mendel. I am very curious how this will print on other types of 3dprinters so please let me know your results.
the size for printing is 164 x 147 x 33 mm
The closed box is 100 x 100 x 35mm
Sofar I have seen very nice result from makerbots even scale down to 0.6 the hinges work great.
for the single colored box I used Slic3r with concentric infill for bottom,
bottom layer 0,4mm
next layers 0,3mm On a Prusa 2 with 0.5mm nozzle
To get good filmhinges it will help if you have a concentric first layer infill, have a nicely printed first layer and carefully remove the print from the bed.
For the dual colored box I used Cura 13.12 with a wipetower. The oozeshield didn´t work well with this design. first layer 0,25, other layers 0,15mm. Printed on a mowi printer with two 0,35mm nozzles.
