Optical illusion pinwheel with bearings 3D for print
3348 Views 3 Likes 0 Downloads Download the piece here from 3dforprint
Remix of Optical Illusion Pinwheel from Dalpek
with bigger blades and 608 (2RS) bearings.
Turns into the wi...nd.
Uses original blades, printed with 180% of original size.
Needs three 608 (2RS) bearings and a 4mm diameter rod
- Rod needs to be glued in place with epoxy
- Caps should be glued to the bolt with a drop of superglue or epoxy
- Bearings and... bolts (should) fit in place
Designer
3DMK3d model description
Optical Illusion Pinwheel with BearingsRemix of Optical Illusion Pinwheel from Dalpek
with bigger blades and 608 (2RS) bearings.
Turns into the wi...nd.
Uses original blades, printed with 180% of original size.
Needs three 608 (2RS) bearings and a 4mm diameter rod
3d model print parameters
- Printed with PETG- Rod needs to be glued in place with epoxy
- Caps should be glued to the bolt with a drop of superglue or epoxy
- Bearings and... bolts (should) fit in place
