Origami carabiner by ddf3d.com 3D for print
2804 Views 3 Likes 0 Downloads Download the piece here from 3dforprint
This is the design based on "selflex level 7" customized to special size.
Perfectly hook on your back pack or key for... your daily life.
The design is simplified and strong, print without support and raft in short time.
Layer Texture design
Customized your own texture by different layer height.
For bring tactile and visual new feelings.
The design come with only 2 parts, hook and door, very easy to assembly and easy to make different scale for your need.
Door Flexible Strength = 7 (check out the selflex introduce on http://www.ddf3d.com/design)
Download more cool design:
http://www.ddf3d.com/goods
Visit our website:
http://www.ddf3d.com/
Design for general FDM 3D printer print by PLA or ABS material.
No additional support need, easy to print.
Fast print design make general print time around 45-100 min.
When print on scale 1, infill 50%, nozzle 0.4mm, shell loop 3, general can load 15-35kg load.
The design can print without support and raft set.
Layer high from 0.15mm~0.3mm is fine.
Infill better to use over 50%.
cheers ;)
ddf3d.com
PING 3D Printer
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
50%
Notes:
After stress tested, as our ...test, the number of loops is more important than infill, general nozzle is 0.4mm, put number of loops more than general 2 loops, change to 3 or more, this will make solid shape of the hook part, also bring stronger strengh of door part :)
Design for general FDM 3D printer print by PLA or ABS material.
When print on scale 1, infill 50%, nozzle 0.4mm, shell loop 3, general can load 15-35kg load.
ABS is better than PLA on tensile load and flexible spring strength.
https://youtu.be/SRAUg5wER9U
Designer
ddf3d .com3d model description
Announce ORIGAMI Carabiner !This is the design based on "selflex level 7" customized to special size.
Perfectly hook on your back pack or key for... your daily life.
The design is simplified and strong, print without support and raft in short time.
Layer Texture design
Customized your own texture by different layer height.
For bring tactile and visual new feelings.
The design come with only 2 parts, hook and door, very easy to assembly and easy to make different scale for your need.
Door Flexible Strength = 7 (check out the selflex introduce on http://www.ddf3d.com/design)
Download more cool design:
http://www.ddf3d.com/goods
Visit our website:
http://www.ddf3d.com/
Design for general FDM 3D printer print by PLA or ABS material.
No additional support need, easy to print.
Fast print design make general print time around 45-100 min.
When print on scale 1, infill 50%, nozzle 0.4mm, shell loop 3, general can load 15-35kg load.
The design can print without support and raft set.
Layer high from 0.15mm~0.3mm is fine.
Infill better to use over 50%.
cheers ;)
ddf3d.com
3d model print parameters
Printer:PING 3D Printer
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
50%
Notes:
After stress tested, as our ...test, the number of loops is more important than infill, general nozzle is 0.4mm, put number of loops more than general 2 loops, change to 3 or more, this will make solid shape of the hook part, also bring stronger strengh of door part :)
Design for general FDM 3D printer print by PLA or ABS material.
When print on scale 1, infill 50%, nozzle 0.4mm, shell loop 3, general can load 15-35kg load.
ABS is better than PLA on tensile load and flexible spring strength.
https://youtu.be/SRAUg5wER9U
