Parametric nesting fidget cube 3D for print
5264 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
http://www.thingiverse.com/thing:2169371
It's 2 fidgets in one.
Size of... blocks is 20mm.
When printed all hinges should be moved carefully. Once it starts move it wil be OK.
Ears on top hinges are weakest part, be carefull with it at the beginning.
Bottom hinges are the hardest part to start moving.
Prusa
Printer:
Prusa Steel
Rafts:
No
Supports:
No
Resolution:
layer 0.15mm nozzle 0.4mm
Infill:
20%
Notes:
No ...support/brim needed Cooldown enabled Printed in HIPS (ABS is OK too)
Designer
aahz3d model description
This fidget cube is like a box that contain another fidget cube inside:http://www.thingiverse.com/thing:2169371
It's 2 fidgets in one.
Size of... blocks is 20mm.
When printed all hinges should be moved carefully. Once it starts move it wil be OK.
Ears on top hinges are weakest part, be carefull with it at the beginning.
Bottom hinges are the hardest part to start moving.
3d model print parameters
Printer brand:Prusa
Printer:
Prusa Steel
Rafts:
No
Supports:
No
Resolution:
layer 0.15mm nozzle 0.4mm
Infill:
20%
Notes:
No ...support/brim needed Cooldown enabled Printed in HIPS (ABS is OK too)
