Parametric pole clamp 3D for print
1067 Views 0 Likes 0 Downloads Download
This was originally designed to hold a Lulzbot Taz spool holder http://download.lulzbot.com/TAZ/3.0/production_parts/printed_parts/stl/spool_arm_2.STL attached to a 1" pole in my workshop. However it's parametric and could be customized for any clamping-to-a-pole needs.
- 4× M3-8 bolts (socket cap work nicely)
- 4× M3 nuts
- 1× M8 nut
- 1× M8-short bolt...
Designer
Steve Pomeroy3d model description
This clamps onto a 1" pole and has two M8 nut traps on it. I designed it to hold a 5LB filament spool, but it's parametric and could be adjusted in a ...number of ways.This was originally designed to hold a Lulzbot Taz spool holder http://download.lulzbot.com/TAZ/3.0/production_parts/printed_parts/stl/spool_arm_2.STL attached to a 1" pole in my workshop. However it's parametric and could be customized for any clamping-to-a-pole needs.
3d model print parameters
- 2× printed parts- 4× M3-8 bolts (socket cap work nicely)
- 4× M3 nuts
- 1× M8 nut
- 1× M8-short bolt...
